1. Connect the EasyST to your PC or LAN
Plug the supplied Category 5 Ethernet cable into the EasyST's 8-pin RJ-45 port
Plug the other end of the Category 5 Ethernet cable into your computer's LAN port
2. Connect the EasyST to the power supply
Plug the AC/DC power adapter's power cable into the EasyST's DC power socket.
Plug the prongs of the power adapter into the electrical wall outlet
3. Position the EasyST where it can get the strongest signal.
You will be able to see the strength on the LED on the base of the EasyST.
Five LEDs showing is the maximum signal strength.
Minimum PC requirements: Ensure that your computer provides an Ethernet interface such as a Network Interface card (that provides an RJ-45 port).
Physical Dimensions: The Easy ST is 130 x 145 x 145 mm (5.12 x 5.7 x 5.7 inches)